Hellfire is extremely light weight and powered by a new more powerful Nitro Star K4.6 HO engine. The new engine is based on the proven HPI Nitro Star K4.6 known from the Savage SS 4.6. The new "High Output" version provides increased horse power and more torque.



Large dual stage air filter	Machined aluminum engine heat sink	8.5mm composite slide carburettor with 3 needles	Hard anodized exhaust pipe and header

Hellfire offers a wide range of tuning adjustments. You can fine tune the truck to every condition or personal driving style. All important suspension parameters are easily adjustable. No option parts are necessary to adjust the suspension settings and several configurations are possible with the included parts. Eccentric bushings are used for a convenient adjustment of toe in, kick up, anti dive and anti squat.

Full List of Adjustments:

Front inboard toe angle adjustments: 0 degrees to -2 degrees.
Rear inboard toe angle adjustments: 2 degrees to 4 degrees.
Adjustable front and rear camber using strong steel turnbuckles.
The camber can be fine tuned to suit your track conditions.
Adjustable steering geometry.
Spring clips are included to fine tune your ride height.
Anti-dive adjustments: 0 degrees to 2 degrees in 0.5 degree increments.
Anti-squat adjustments: 1.5 degrees to 3.5 degrees in 0.5 degree increments.
Front kick-up angle: adjustable from 21 to 25 degrees.
24 possible shock positions available to fine tune your suspension.
Four different shock pistons are included for a wide range of tuning options.
Different compression and rebound can be achieved with tapered shock pistons.
Damping can be fine tuned with different diameter holes.
Adjustable brake bias to control entry steering and jumping.
Adjustable front and rear inboard toe with convenient urethane eccentric bushings.


Multiple mounting points for upper wishbone	Multiple mounting points on shock towers	Multiple mounting points on the steering plate for different ackerman.	Aluminium wishbone braces and eccentric bushings.

Multiple mounting points on rear hub for upper wishbone	Multiple mounting points for shocks on wishbone	Adjustable turnbuckles	Adjustable body post


The Hellfire has been designed to allow for easier maintenance with simplified access to all parts. For example only 6 screws have to be removed to access the front or rear diff without dismantling the main chassis or suspension. High quality hex hardware is used throughout to reduce the possibility of stripped screws. All major suspension components are retained or captured without the use of E-clips. Maintenance is simplified and parts are held more securely in place.

Easy access to front and rear diffs	No e-clips	6 screws to get to the front and rear diff


The Hellfire will be available "Ready-To-Run" making it the highest off-road performance truck available to everybody. A high quality HPI TF-3 radio set is included as well as a 1100 mAh, 5-cell receiver pack with 2 hour wall charger.

High Torque SF-2 servo	High quality HPI TF-3 transmitter	6V receiver pack and charger included	Water resistant radio box



Low center of gravity for optimal handling	Low center of gravity for optimal handling	Smooth chassis with countersunk screws	Recessed engine mount screws

Rolled chassis edges for increased chassis stiffness	Black anodized aluminum upper deck for increased chassis rigidity	Front and rear chassis braces to support shock towers	High Power Nitro Star K4.6 HO engine for "insane" top speed and accerleration

Hard anodized exhaust pipe for maximum power	Fuel tube routing for decreased fuel line breakage and better fuel delivery	Internal fuel tank filter + external high quality fuel filter for maximum protection for your engine	Long travel front suspension for excellent handling over rough terrain

Long travel rear suspension for excellent handling over rough terrain	Nitride coated shock shafts for smooth damping action	Front castor block and knuckle arm	Rear hub

E-clips free adjustable hinge pins	Easy access to center diff	Front and rear anti roll bars included for controlled chassis roll	Water resistant radio box

Wire routing protects wires from moving around	Steel spur gear and hardened racing clutch bell for maximum durability	17mm Hex hubs retained with pin and grub screw for maximum durability and easy maintenance	Vented steel brake disks for optimal deceleration

Universal joint drive shaft on all four wheels for smooth power transfer and optimal durability	Universal joint center drive shafts to front and rear gearboxes for smooth power transfer and optimal durability	"Aggressors" tires for best traction	Tread pattern designed to suit a multitude of surfaces

Hellfire Specifications:

Wheelbase = 348mm*
Total Length = 513mm
Total Width = 415mm
Total Height = 173mm
Weight = 9.2 lb (ready to run, less fuel)

Reference Wheelbases: Savage = 335mm, 1/8 scale Buggy = 323mm
*Varies with Inboard Toe Setting

Precios m�s bajos! Las mejores marcas! Seguridad y Garant�a.

Discoteca, Teatro, Set de Tv, Dj Aficionado, Dj profesional, Quiz�s Mago � Aficionado a los autos? Iluminaci�n-Sonido-Video en www.Zoladi.com. Zoladi siempre a tu lado por m�s de 11 a�os! Somos y queremos seguir siendo tu mejor opci�n. Por eso Zoladi pone a tu disposici�n herramientas para que cada uno de nuestros clientes est�n en contacto No solo en nuestras tiendas Sino tambi�n; Por tel�fono, Por la P�gina Web, Por Email, Por Chat... Hacemos todo lo posible por estar m�s cerca de t�.

NOTA: Precios y promociones en nuestra p�gina web. "Pudiesen" no ser los mismos que en las tiendas. Estas promociones son validas para clientes que visitan nuestro Website. Reg�strate como cliente por internet, ll�manos � m�ndanos un mensaje para acreditar tu visita a la web y acceder a estas promociones.

Haz tus pedidos al: (511) 4263568 42816536 ventas@zoladi.com Visitanos; Jr. Paruro 1288 2do piso. LIMA-PERU.

Puedes pagar en nuestras tiendas en efectivo, transferencia bancaria y principales tarjetas!